Cap for Permatex Replacement Nozzle (40mm L with 3mm D + STEP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was after a cap for my Permatex di-electric grease, and thought a finer nozzle would be great on it as well.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
I was really after a cap for a tube of Permatex Dielectric Tune Up Grease. Every single tube I open, the cap splits in half across its diameter. This is the third tube in a row where it has split. I'm starting to think its a chemical reaction between the cap and grease. Either way here is just a quick nozzle I made based on others work. Easily possible because of shared step files which should be a standard requirement for any model upload, seeing as they can be imported into mostly any slicer. Enjoy. More sizes in the future most likely. I have a feeling this is going to make a cold tube really difficult to squeeze.