Parametric Rugged Box - Drastically Improved (PLA friendly)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
While I liked the original. It was in need of improvement. Mostly hinge and latch, but also some other tweaks.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
***See the "Differences of the remix compared to the original" down below for changes/improvements.
This modification limits the hinge rotation to 125 degrees in order to drastically improve hinge sturdiness. This does not inhibit its function as a box in any way.
Please note I recommend these as minimum parametric values before you may need to sift through the timeline and change things. For your convenience i have 'favourited' the important parameters.
This makes a very tiny box already.
I have not experienced any issues scaling up to 200mm in any direction.
len - 52
wid - 22mm
hei - 227mm
splitTop - Appears to work between 10% to 50% height. More than this causes breaks. It also varies based on the total internal height (hei) of the box.
nubbin - Added parameter to better control aggressiveness of latch hump. Set to 3mm to a more loose latch, or 4.5mm for a much tighter fit.
Any other values are kept to the creators default. I am unsure how changing these will affect the model.