1 / 5
12V Car Battery Terminal Covers +/- .f3d/.step files available #0021 — zdjęcie 1
1 / 5

12V Car Battery Terminal Covers +/- .f3d/.step files available #0021

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Car Battery Terminal Covers +/- .f3d/.STEP files available if u want to modify them.

Ocena
0 / 5
Polubienia
4
Pobrania
41
Wydruki
0
Wyświetlenia
118
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Summary:

12V Car Battery Terminal Covers +/-

Print settings:

  • Prusa 0.15mm Structual Preset

  • Smart fill Fuzzy Skin on the outside of the cylinder 0.1mm and 0.05mm

  • 3 Perimeters

  • If you want a smooth finish use the default ironing in Prusa Slicer (All Top Surfaces)

  • For ABS/ASA/Filaments prone to warping: 6mm brim, preferably a minimum of 40C chamber temp and a satin print sheet

(Settings tested on Prusa Core One/+)

Filaments

I printed it in Bambulab Lipstick Red ASA but u can also use PETG, ABS or PC

Additional Info

Fusion360 and .STEP files Avalible.Fusion360 and .STEP files Avalible. So feel free to make a remix.

Tagi