Fruit Fly Trap – Simple, Clean & Reusable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,78 € – 0,95 € netto (bez VAT)
Dla pliku: fruit-fly-trap-by-prntmkr.bgcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,86 € netto (środek widełek).
- Masa podana przez autora
- 14 g
- Czas druku podany przez autora
- 42,6 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
A Fruit Fly Trap – Simple, Clean & Reusable
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 136
- Wydruki
- 1
- Wyświetlenia
- 928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Intro
Fruit flies appear out of nowhere – especially when fruit is in the kitchen. This 3D-printed trap turns any small glass into a simple, effective and reusable fruit fly trap.
Just place the lid on a glass with some fruit juice, a little vinegar and - this is important - one tiny drop of dish soap. The flies are attracted by the smell, enter through the openings, and can’t easily escape.
Minimal effort. Maximum effectiveness.
How to Use
Use dark colored filament to print the lid. Fruit flies instinctively move toward light sources.
If the trap lid is printed in dark filament, the inside of the glass stays relatively darker while the surrounding environment appears brighter.
Fill a glass with about 1–2 cm of fruit juice and some vinegar.
Add one drop of dish soap (breaks surface tension).
Place the printed lid on the glass.
Put the trap near fruit bowls, compost bins, or the sink.
The smell attracts fruit flies, they enter through the slots and remain trapped.
It may take a few days as the trap develops. So please be patient.
Why you'll love it?
Fits common glasses: Designed for typical drinking glasses or small jars up to 8cm.
Smart entry slots: Narrow slits guide fruit flies inside while making it difficult for them to escape.
Clean design: Simple, modern look that blends nicely into your kitchen.
Reusable: Just rinse the glass and reuse the lid.
No chemicals needed: Works with simple household ingredients.
Recommended print settings
Nozzle: 0.4mm
Layers: 0.2mm
Infill: 100%
Top/Bottom filling pattern: Concentric
Seam: Random
Material: I recommend to use PLA or PETG (see below) - dark color works better
Filament recommendation
I printed this model using Prusa Prusament and got great results. See below for my recommendations.
Prusament PLA Galaxy Black
Copyright
You are welcome to print this model for personal use. Please respect the copyright. Unauthorized reuploads are monitored and reported.
Feedback & Support
If you enjoy this model, please consider hitting the LIKE button – it truly supports my work.
Have ideas, FEEDBACK or suggestions for improvements? I’d love to hear them – feel free to leave a comment.
Printed it already? That’s the best compliment! Please share a photo in the MAKES section – seeing your prints is incredibly motivating and helps others get inspired too.
Thank you for supporting independent designers and makers. ❤
Follow me for more like this...
FOLLOW ME for more practical prints, upgrades, and tools – new models coming soon.
Check out my profile for all uploads.
You may also like these models
This model is part of my huge collecion. Do not miss to check out what else could be useful to you.
