French 1st Rate Ship of the Line
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D model of a ship loosely based on the French first-rate ship of the line L’Orient.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D model is inspired by the French first‑rate ship of the line L’Orient. The hull is divided into four printable sections, and the deck is split into two parts, allowing the full model to be produced on most printers, albeit you’ll be printing for a long while(!)
I designed this to see how big I could make a ship on my printer and if printing in sections could work :)
Dimensions
Length: 480 mm
Height: 136 mm
Width: 123 mm
Assembly Features
Hull alignment: Integrated 3.5 mm guide holes are placed along the hull for easy, accurate assembly.
Masts: Each mast “hole” includes is 3.5mm
(The masts from the picture are a bit of a WIP...)