1 / 3
Mini GPS Case – NEO-6M / NEO-7M / NEO-8M — zdjęcie 1
1 / 3

Mini GPS Case – NEO-6M / NEO-7M / NEO-8M

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compact 3D printed enclosure for GPS modules NEO-6M / NEO-7M / NEO-8M with a separate ceramic antenna.

Ocena
5 / 5
Polubienia
10
Pobrania
151
Wydruki
0
Wyświetlenia
573
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Compact 3D printed enclosure for GPS modules NEO-6M / NEO-7M / NEO-8M with a separate ceramic antenna.

The GPS module is mounted in the bottom, while the ceramic antenna sits above it, all inside one small case.

The enclosure is closed using 4x M2 screws with heat-set inserts.


Hardware

  • 4 × M2 heat-set inserts

  • 4 × M2 screws (6–8 mm)


Assembly

  1. Install M2 heat-set inserts in the bottom part.

  2. Place the GPS module inside.

  3. Put the ceramic antenna on top.

  4. Close the lid and tighten 4 screws.

Tagi