1 / 3
Mini GPS Case – NEO-6M / NEO-7M / NEO-8M — image 1
1 / 3

Mini GPS Case – NEO-6M / NEO-7M / NEO-8M

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Compact 3D printed enclosure for GPS modules NEO-6M / NEO-7M / NEO-8M with a separate ceramic antenna.

Rating
5 / 5
Likes
10
Downloads
151
Makes
0
Views
573
Reviews
1

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Compact 3D printed enclosure for GPS modules NEO-6M / NEO-7M / NEO-8M with a separate ceramic antenna.

The GPS module is mounted in the bottom, while the ceramic antenna sits above it, all inside one small case.

The enclosure is closed using 4x M2 screws with heat-set inserts.


Hardware

  • 4 × M2 heat-set inserts

  • 4 × M2 screws (6–8 mm)


Assembly

  1. Install M2 heat-set inserts in the bottom part.

  2. Place the GPS module inside.

  3. Put the ceramic antenna on top.

  4. Close the lid and tighten 4 screws.

Tags