Element RC Portalhousing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
High clearance portal housings for Element RC axles. And conversion to actual rear axle.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Portal housings for Element RC portal axles. I was only going to do a proper rear axle conversion, but ended up designing the front as well for high clearance.
C-hubs for the front are quite thin, i have printed mine out of Prusament PC blend, seems to hold up, but i haven't done any extensive testing. Could turn the steering pivot more vertical for more clearance to fit more material in the lower arm of the c-hubs.
rear housings are pretty solid, and will probably hold up just fine with petg.
Front housings will need some support. All the other parts can be printed without supports.
Will use all the original hardware from the factory housings, stock portal covers wont fit.