S17 Antminer 200mm Air Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for installing a 198mm HI-200EC to a S17 Antminer.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Print Settings
Material: PETG (Recommended for heat resistance)
Infill: 15%
Design: Two-piece, support-free printing.
Optional Gaskets: TPU (100% infill, 0.6mm / 3 layers thick) for airtight sealing.
Required Hardware
Screw Type: M4 (or applicable diameter for your model).
Length: >45mm (The original 42mm screws will be too short due to the added thickness of the duct).
Installation Notes
The Screw-Plate: The duct is secured to the PSU using a dedicated screw-plate.
Clearance: Be aware that the inner screws are located in a tight-clearance area; a thin-profile driver or ball-end hex key is recommended.
Sealing: Use the optional TPU gaskets between the duct and the PSU face to maximize static pressure and prevent air bleed.
⚠ Disclaimer
Modifying your mining hardware can improve thermals but is done at your own risk. Ensure your fan speeds are monitored after installation to verify airflow efficiency.