1 / 9

S17 Antminer 200mm Air Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

J.V.H.

@J_V_H

Adapter for installing a 198mm HI-200EC to a S17 Antminer.

Rating: 0 / 5
Likes: 0
Downloads: 18
Makes: 0
Views: 177
Reviews: 0

Updated at source: Mar 8, 2026

Model information

Source: Printables
Category: Other House Equipment
License: Creative Commons — Attribution — Noncommercial

Details Files (5)Makes & comments (Makes: 0) (Comments: 0)Remixes (0)Collections (2)

Print Settings

Material: PETG (Recommended for heat resistance)
Infill: 15%
Design: Two-piece, support-free printing.
Optional Gaskets: TPU (100% infill, 0.6mm / 3 layers thick) for airtight sealing.

Required Hardware

Screw Type: M4 (or applicable diameter for your model).
Length: >45mm (The original 42mm screws will be too short due to the added thickness of the duct).

Installation Notes

The Screw-Plate: The duct is secured to the PSU using a dedicated screw-plate.
Clearance: Be aware that the inner screws are located in a tight-clearance area; a thin-profile driver or ball-end hex key is recommended.
Sealing: Use the optional TPU gaskets between the duct and the PSU face to maximize static pressure and prevent air bleed.

⚠ Disclaimer

Modifying your mining hardware can improve thermals but is done at your own risk. Ensure your fan speeds are monitored after installation to verify airflow efficiency.