Counting matching models…
Iphone stand with magsafe slot, supports IOS 17 standby mode, included with slot for Apple Watch charger in front. Works fine with my Iphone 14 Pro Support IOS 17 Standby mode! Print with supports as suggested, might get away with not…
can be printed right side up or upside down with supports. infill: 15% material: PLA
Nice nightstand charging dock for the combination of: iPhone 13 mini Otterbox Symmetry Belkin BoostUp Wireless charging pad 10W
This model is designed to work with this 3rd party charger: https://geni.us/MagSafeWirelessCharger Please do ‘like’ this project - it helps me out at no cost to yourself. Thank you. Supports are required to print it, I highly recommend…
I wanted to do a phone stand to take advantage of the ios17 standby feature. I wanted the ability to not charge when upright, but charge when horizontal. I found a small magnetic charger puck and designed this stand to work with it. The…
This could be altered to accommodate many different applications. I am currently working on a version to use on the drawers and shower door in my Transcend Camper. I have uploaded a 10mm version that is quite a bit lighter and does the…
Dimensions should be correct my printer failed to print it 3 times Category: Other
Important: this is not a print-in-place model. You have to seperate the two parts in your slicer. I also recommend printing the lid standing upright. If you print it lying down the latches will probably snap.
Print Settings Material: PETG (Recommended for heat resistance) Infill: 15% Design: Two-piece, support-free printing. Optional Gaskets: TPU (100% infill, 0.6mm / 3 layers thick) for airtight sealing. Required Hardware Screw Type: M4 (or…
A simple thread protector for Chameleon SS17/SS25 whip antennas. Fitted and designed using the SS25, however the SS17 should work just fine as they have the same thread pattern. Note, the diameter of the cap may differ for the SS17 (I…
My JZS171W does not have a trunk opener button, unlike the sedans, so I modeled this to serve as a baseline template for future mods.
STL del modelo original. Tamaño muy pequeño, redimensionar para imprimir. Se ha exportado directamente desde Blender. Print Settings Rafts: No Supports: No Category: People
Very simple model. 11mm ball with a 5mm hole. No need for supports. Just remove the screw and stock handle, and then the Ball will push on the remaining nub.
This paper "peeler" and hex bushing are replacement parts for the Aurora AS1712X shredder. The "peeler" acts as a spacer between the cutting wheels and helps peel the paper away from the cutter axle/post as the paper is being shredded.…
This is a printable base model (or blank) of the center console switches for the Toyota Crown. It's intended to be used as a base for designing your own buttons for your custom integrations.
This has been an idea I had been conceptualizing for a long time- having a blended or more-discreet radar installation that looks OEM-ish. I finally found a car that I wanted to put this on, so here is the model. In the original model…
This is an adapter for using a K&N 33-2170 air filter (made for the GS300) in a JZS171. I was unable to source a washable air filter in the United States for my car, but I found that this offering from K&N had the same mating length and…
A simple thread protector for Chameleon SS17/SS25 whip antennas. Fitted and designed using the SS25, however the SS17 should work just fine as they have the same thread pattern. Note, the diameter of the cap may differ for the SS17 (I…
Print Settings Material: PETG (Recommended for heat resistance) Infill: 15% Design: Two-piece, support-free printing. Optional Gaskets: TPU (100% infill, 0.6mm / 3 layers thick) for airtight sealing. Required Hardware Screw Type: M4 (or…
