Drive DriveKeys Plate for ASL 128 Molecule Joystick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A DriveKeys plate designed to mount the ASL 128 Molecule joystick.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Open Community License v1
This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection.
This plate is designed to mount the ASL 128 Molecule joystick, allowing the wheelchair’s primary drive control to be installed within the DriveKeys modular system.
This plate retains the joystick used for everyday wheelchair navigation while maintaining compatibility with the DriveKeys swappable plate architecture.
Additional Hardware
In addition to the Base Mount and it's hardware, you'll also need:
1x M5x20mm socket cap bolts
2x M5x40mm socket cap bolts
(Optional) 3x M5 nuts, which can be used to 'lock' the M5 bolts in place once secured
(Optional) PLASTIC SAFE Threadlocker
(Optional) 10x M5 washers, which can be used as 1mm spacers to hold the joystick at a desired height.
Required Tools
M5 Allen Wrench
M5 Crescent Wrench or Small Pliers
Soldering Iron with temp control: I use a Pinecil set to 330c to heat-press the threaded inserts into the prints.
Assembly
Assembly is straightforward: heat-press the M5 inserts into the bottom of the plate, and one more into the back-side hole on the mounting cup. The longer M5 bolts suspend the joystick into the hole while the shorter M5 bolt clamps the joystick into the cup.
This plate requires the DriveKeys v11 base mount which can be found here:
If you or someone you know could benefit from something similar, especially if you don’t have access to a 3D printer, reach out at [email protected]—we’d love to help. And if you're enjoying these projects, consider supporting me on Patreon to help keep the ideas and designs coming! patreon.com/oddinventor.