1 / 2
Drive DriveKeys Plate for ASL 128 Molecule Joystick — image 1
1 / 2

Drive DriveKeys Plate for ASL 128 Molecule Joystick

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A DriveKeys plate designed to mount the ASL 128 Molecule joystick.

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
33
Reviews
0

Updated at source:

Model information

License
Open Community License v1

This DrivePlate is part of the DriveKeys Modular Wheelchair Platform Collection.

This plate is designed to mount the ASL 128 Molecule joystick, allowing the wheelchair’s primary drive control to be installed within the DriveKeys modular system.

This plate retains the joystick used for everyday wheelchair navigation while maintaining compatibility with the DriveKeys swappable plate architecture.

Additional Hardware

In addition to the Base Mount and it's hardware, you'll also need:

  • 3x M5x10mm Threaded Inserts

  • 1x M5x20mm socket cap bolts

  • 2x M5x40mm socket cap bolts

  • (Optional) 3x M5 nuts, which can be used to 'lock' the M5 bolts in place once secured

  • (Optional) PLASTIC SAFE Threadlocker

  • (Optional) 10x M5 washers, which can be used as 1mm spacers to hold the joystick at a desired height.

Required Tools

  • M5 Allen Wrench

  • M5 Crescent Wrench or Small Pliers

  • Soldering Iron with temp control: I use a Pinecil set to 330c to heat-press the threaded inserts into the prints.

Assembly

Assembly is straightforward: heat-press the M5 inserts into the bottom of the plate, and one more into the back-side hole on the mounting cup. The longer M5 bolts suspend the joystick into the hole while the shorter M5 bolt clamps the joystick into the cup.

This plate requires the DriveKeys v11 base mount which can be found here: 


If you or someone you know could benefit from something similar, especially if you don’t have access to a 3D printer, reach out at [email protected]—we’d love to help. And if you're enjoying these projects, consider supporting me on Patreon to help keep the ideas and designs coming! patreon.com/oddinventor.

Tags