Sortimo T-BOXX Compatible 9x10 Drawer Grid - Modular System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,94 € – 1,15 € netto (bez VAT)
Dla pliku: Part_D_Back_Center_1x_0.2mm_PLA_MK3S_1h9m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 1,05 € netto (środek widełek).
- Masa podana przez autora
- 11 g
- Czas druku podany przez autora
- 1,15 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
9x10 Modular Grid (90 bins) for Sortimo T-BOXX. 5 easy-to-print parts to organize your entire workshop drawer.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sortimo T-BOXX Compatible Drawer Organizer Grid (9x10)
Tired of loose bins sliding around in your workshop or garage drawers? This modular grid system is designed to create a rock-solid 9x10 layout (fitting up to 90 bins) based on the popular Sortimo T-BOXX standard.
While many models only offer small, single-plate connectors, this system uses 5 large printable sections to cover a full drawer efficiently. This ensures the grid stays flat and stable, even when opening and closing heavy drawers.
Drawer Compatibility & Dimensions
This grid system was specifically designed for the Daytona Werkbank Pro https://www.datona.nl/werkbank-bamboe-werkblad-18lades-200cm-combi-line-zwart. Please measure your drawer before printing to ensure a perfect fit:
Drawer Width: 534mm
Drawer Depth: 518,5mm
Drawer Height: 65mm
The Layout (90 Bins Total)
To complete the full 9x10 grid, you will need to print the following 9 pieces:
Part Name | Position in Drawer | Quantity |
|---|---|---|
Model A | Front-Left, Mid-Left, Front-Right, Mid-Right | Print 4x |
Model B | Front-Center, Mid-Center | Print 2x |
Model C & E | Back-Left AND Back-Right | Print 1x |
Model D | Back-Center | Print 1x |
Printer & Print Times
This model was designed and successfully tested on a Prusa i3 MK3S.
Total printing time is approximately 19 hours and 30 minutes. Here is the breakdown per part:
Part A (4x): 2h 15m per piece (Total: 9h)
Part B (2x): 2h 44m per piece (Total: 5h 28m)
Part C & E (1x): 1h 55m
Part D (1x): 1h 9m
Technical Specifications
This model is optimized for speed and material efficiency while maintaining structural integrity.
Height: 2.5 mm
Grid Size: Standard Sortimo (Inset-box) compatible
Total Capacity: 90 bin slots
Recommended Print Settings
Material: PETG (recommended for garage/workshop durability) or PLA+.
Infill: 15% (Grid or Gyroid recommended).
Walls: 2 or 3 perimeters.
Layer Height: 0.20 mm or 0.28 mm.
Adhesion: Use a brim if you experience warping on the larger plates.
Assembly Instructions
Clear the drawer: Ensure the surface is flat.
Lay the front & middle rows: Start with the 4x Model A and 2x Model B.
Finish the back: Place Models C, D, and E at the very back of the drawer.
Load the bins: Once the bins are placed, the weight will lock the grid into place—no screws or glue required!
Open Source & Customization
I believe in open design! If you need to tweak the dimensions for a custom drawer size, you can access the original OnShape document here:
(Note: Please create a copy of the document in OnShape if you wish to make edits.)