CORE One corner plug with various magnet sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CORE One corner plug with various magnet sizes from 4x1.6mm to 8x3mm. Includes Fusion file!
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my design for a miniature UFO scale model corner plug for your CORE One!
I included the Fusion .f3d file so feel free to make any edits.
Print details:
Heat-resistant materials such as ASA, PC (or composites), ABS, PETG, etc. is recommended! Print flat face down as in the model orientation.
I printed mine with Polymaker ASA at 0.2 mm layer height, 3 perimeters / top / bottom layers, and 15 % gyroid infill. It takes ~ 7 g of filament and 35 min to print a set of four. If you have the Buddy3D camera you only need three.
Magnets:
The magnet slots are designed to be press-fit, but I recommend adding a small drop of CA glue to make sure they don't fall out!
Measure your magnets - Most of the cheap magnets advertised as X by 2 mm are actually 1.6 mm thick! Obviously they will still work, so I included models for 1.6 mm thickness as well.