CORE One corner plug with various magnet sizes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
CORE One corner plug with various magnet sizes from 4x1.6mm to 8x3mm. Includes Fusion file!
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 33
- Makes
- 0
- Views
- 335
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my design for a miniature UFO scale model corner plug for your CORE One!
I included the Fusion .f3d file so feel free to make any edits.
Print details:
Heat-resistant materials such as ASA, PC (or composites), ABS, PETG, etc. is recommended! Print flat face down as in the model orientation.
I printed mine with Polymaker ASA at 0.2 mm layer height, 3 perimeters / top / bottom layers, and 15 % gyroid infill. It takes ~ 7 g of filament and 35 min to print a set of four. If you have the Buddy3D camera you only need three.
Magnets:
The magnet slots are designed to be press-fit, but I recommend adding a small drop of CA glue to make sure they don't fall out!
Measure your magnets - Most of the cheap magnets advertised as X by 2 mm are actually 1.6 mm thick! Obviously they will still work, so I included models for 1.6 mm thickness as well.