SofleRGB AliExpress DIY kit case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for SofleRGB PandaKB DIY kit from AliExpress.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to @Hans for the original model I based mine on.
This PCB can be assembled in several ways. My version is shown in several photos.
I added an extra pin to the display connector to experiment with a Nice!View display. See the photos.
The FreeCAD source code of my model is attached. It also includes a scaled photo of the empty PCB for reference.
The reset button design isn't the most convenient for assembly, but it's doable.
Only the first backlight LED is used. To transmit the light a 1.75 mm transparent PETG fiber is ran through the top lid to an LED.
BOM
M3x5x4.2 heated insert - 4 pcs (for display cover)
M3x8 screw - 4 pcs (for display covers)
M2x3x3 heated insert - 10 pcs (bottom cover)
M2x6 screw - 10 pcs (bottom covers)