1 / 12
Filament cap AND clip with NFC chip for filament identification — zdjęcie 1
1 / 12

Filament cap AND clip with NFC chip for filament identification

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A PTFE cap, a filament cap, a filament clip AND NFC tag holder in one... For keeping my filament airtight, I used caps…

Ocena
0 / 5
Polubienia
6
Pobrania
37
Wydruki
0
Wyświetlenia
688
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

A PTFE cap, a filament cap, a filament clip AND NFC tag holder in one...

For keeping my filament airtight, I used caps that hold both the PTFE tube, as well as the filament that is coing out of the IKEA Sammla boxes, see https://www.thingiverse.com/thing:3775679

I use Printoid: software on my Android phone connected to Octoprint. For keeping inventory of my filament there is another software (RolllingUp) from the same author. This software allows using an NFC chip to retrieve information on filament roles. It will remember what you printed with which filament and calculate how much filament remains on each role.

As I also needed filament clips. I integrated that in the design as well. Now I can clip the roles, also when removed from the dry-box.

Thanks to this NFC chip, I only need to keep my phone close to the filament and I see all relevant printing parameters of the filament, as well as what remains.

The NFC chips used are very cheap, a few dollars for 10 of them. I printed caps in each color of my filament which allows enclosing such an NFC chip in each cap.

Now all information is always ready to consult, no buttons press needed, keep your phone close to it and read info and administrated info on your phone.

Printoid easily communicates the amount of filament to Rollingup, so keeping accurate inventory was never as easy. The NFC chips, now always attached to the roles make administartion even one step easier... and more fun as well!

The cap design

Design details

As can be seen from the cross section, the cap can hold the 4mm PTFE tube as well as 1.75mm filament that is fed from within the tube. The sliced image while printing quite well shows both of these tapering.

A cap as well as a clip

The clip has a ribbed clamping slot, for easy clamping independent of spool type. Print out a clip / cap for every spool: you have a sample what your filament looks like when printed and never have to look for a filament clip anymore.

The cover in which the NFC chip resides is screwed under the cap, so it is well protected / hidden from sight.

NFC chip

The chip

The chip is a simple programmalbe one, that can be bought from Aliexpress from 15 cent, like https://www.aliexpress.com/item/32709729334.html . Also the ticker "coin shape" chips fit, like in the picture.

A coin shaped NFC about to be attached to the cap / clip.

Getting data on your filament

The advantage is that when you hover over your spool with your phone, you see the filament type, what you printed with it and when. This is the functionality of "RollingUp", an Android app from the same developer that brings "Printoid".

Category: 3D Printer Accessories

Tagi