1 / 3
Umarex Gauntlet 2 SL30 Barrel Band
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A barrel band for the Umarex Gauntlet 2 SL30.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a barrel band I made for my SL30, it fits fairly snug and is about a thin as you'd want to make one. I made mine in PETG, but other filaments would probably work just fine. If you find that it's difficult to get on or off as the tolerances are extremely tight, use a paint stick or something to help tap it. You do not need to tighten the screws very much due to the tight tolerances.
Hardware:
x3 M3x20 Socket Head (M3x18 might work as well with less poke out, just harder to find)
x3 M3 Nuts