1 / 3
Umarex Gauntlet 2 SL30 Barrel Band
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A barrel band for the Umarex Gauntlet 2 SL30.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a barrel band I made for my SL30, it fits fairly snug and is about a thin as you'd want to make one. I made mine in PETG, but other filaments would probably work just fine. If you find that it's difficult to get on or off as the tolerances are extremely tight, use a paint stick or something to help tap it. You do not need to tighten the screws very much due to the tight tolerances.
Hardware:
x3 M3x20 Socket Head (M3x18 might work as well with less poke out, just harder to find)
x3 M3 Nuts