1 / 2
Charger support (AlzaPower)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
These large AlzaPower chargers tend to sag down a lot when plugged in horizontally. They also don't hold at all in plugs that downward-facing (located in some trains).
My model solves, or at least greatly improves, these problems by providing support.
Print settings & material:
Material: I highly suggest using at least PETG for heat resistance (I tested PETG and ASA)
Supports: I enabled build plate supports and printed with the "plug" upwards
I made the sleeve as short as possible, so that it won't affect the thermals. In my experience, this hasn't been a problem, but do use this model at your own risk.