Charger support (AlzaPower)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A part that keeps large alzapower charger more stable when plugged in.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
These large AlzaPower chargers tend to sag down a lot when plugged in horizontally. They also don't hold at all in plugs that downward-facing (located in some trains).
My model solves, or at least greatly improves, these problems by providing support.
Print settings & material:
Material: I highly suggest using at least PETG for heat resistance (I tested PETG and ASA)
Supports: I enabled build plate supports and printed with the "plug" upwards
I made the sleeve as short as possible, so that it won't affect the thermals. In my experience, this hasn't been a problem, but do use this model at your own risk.