Qidi Plus 4 CONCH Gap Filler For Stew675's Front Carrier Plate (May Work For Stock Plate)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spacer to fill the gap between Stew's front carrier plate and the Conch hot end! *May* work for stock as well...
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I was excited to outfit my Qidi Plus 4 printers with Conch nozzles, but found rather quickly that they leave a space in-between the new hot end and the front carrier plate.
I use Stew's front end carrier plates, as well as most of his other mods for the Plus 4, and designed a spacer that fits into the front carrier plate and closes this gap so that the hot end is secure.
If you're filament is calibrated correctly, it should be a rather tight fit. This is to ensure that it doesn't move or fall out while printing. I have a couple of thousand hours with the spacer between my 3 printers, and it's working great, so I figured I would release it for anyone else that wants it.
Note that I haven't tested this on the stock hot end...
INSTRUCTIONS
|
|---|
That's all there is to it. Pretty simple.
PRINTING RECOMMENDATIONS
Print in a filament that can handle high heat (I used Polymaker's Fiberon PA6-CF20)
Walls: 4
Infill: 25% (I prefer 3D Honeycomb)