Qidi Plus 4 CONCH Gap Filler For Stew675's Front Carrier Plate (May Work For Stock Plate)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer to fill the gap between Stew's front carrier plate and the Conch hot end! *May* work for stock as well...
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 51
- Makes
- 0
- Views
- 261
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I was excited to outfit my Qidi Plus 4 printers with Conch nozzles, but found rather quickly that they leave a space in-between the new hot end and the front carrier plate.
I use Stew's front end carrier plates, as well as most of his other mods for the Plus 4, and designed a spacer that fits into the front carrier plate and closes this gap so that the hot end is secure.
If you're filament is calibrated correctly, it should be a rather tight fit. This is to ensure that it doesn't move or fall out while printing. I have a couple of thousand hours with the spacer between my 3 printers, and it's working great, so I figured I would release it for anyone else that wants it.
Note that I haven't tested this on the stock hot end...
INSTRUCTIONS
|
|---|
That's all there is to it. Pretty simple.
PRINTING RECOMMENDATIONS
Print in a filament that can handle high heat (I used Polymaker's Fiberon PA6-CF20)
Walls: 4
Infill: 25% (I prefer 3D Honeycomb)
