2007-2014 Suburban/Tahoe/Yukon Armrest Delete
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was a commission to cover the post and bolt hole left after removing the armrest from a 2010 Chevy Suburban.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model was a commission to cover the post and bolt hole left after removing the armrest from a 2010 Chevy Suburban. A couple iterations landed on this design for ease of printing and the lowest possible profile, with 1mm of solid material covering the post.
Print profile for this 3mf file uses a 0.1mm layer thickness to reduce visibility of layer lines in the chamfers
Supports required for the bolt hole
The 3mf file has 4 different plates with different material and support settings
My preference is to use a dissimilar material for support interfaces with PETG whenever possible
Plates for PLA and default supports are included