Temperature Calibration Tower for PLA (190 °C – 230 °C) – Creality Ender-3 V3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PLA Temperature Calibration Tower (190 °C – 230 °C) – Creality Ender-3 V3 SE
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 269
- Wydruki
- 1
- Wyświetlenia
- 883
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
PLA Temperature Calibration Tower (190 °C – 230 °C) – Creality Ender-3 V3 SE
This is a ready-to-print temperature calibration tower for PLA filament, designed specifically for the Creality Ender-3 V3 SE. The model helps you determine the optimal printing temperature for your PLA by testing a range from 190 °C to 230 °C.
The file provided here is pre-generated G-code, so you can print it directly without slicing. Each section of the tower is printed at a different nozzle temperature, allowing you to visually compare layer quality, bridging, overhangs, and stringing across multiple temperature levels.
Temperature range:
190 °C → 230 °C (step changes throughout the tower)
Printer:
Creality Ender-3 V3 SE
Filament:
PLA
Simply copy the G-code file to your SD card or send it to the printer and start printing. After the print finishes, inspect each temperature section to see which one produces the best results for your specific PLA filament.
Since different PLA brands and colors behave differently, this tower is a quick way to find the best temperature for clean surfaces, minimal stringing, and strong layer adhesion.
Note:
This G-code is prepared for the Ender-3 V3 SE. Using it on other printers may lead to incorrect temperatures or print settings.