GMKTec M6 80 mm fan top cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top cover with a place to mount slim 80 mm fan inside the PC
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 377
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
UPDATE 2026-11-04: By request made a 15mm taller version to fit 25 mm thick fans.
Original cooling fan for this computer is a tiny whiny noisy fan. This top lid allows for 80 mm slim (10 mm tall) fan to be mounted inside without increasing the height of the PC. SSD without a heatsink can still be installed even in the top M2 slots with about 4 mm clearance.
4x m3x6 screws or longer are needed to install the cover (probably can use the original screws, I don't remember why I didn't). Use 4 screws that come with the cooling fan to mount it on the bottom of the cover, screwing it from the top.
Print in anything with any settings really, this is a very easy print. Just turn the model upside down in the slicer.
Big thanks to CAD Kim for providing the 3D model for this PC that made the measurement process so much easier