Fast HP Robot Cosmetics Changer System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast cosmetics changer system for the HP Robot. That allows you to fast change cosmetics and is modifiable.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fast changeable cosmetics system which is fully modifiable if you give attribution. You easily swap cosmetics by pulling one out and putting another in and no more.
For what print files to print you need the new FaceUS file to actually be able to change cosmetics. Then if you want to be able to have no cosmetics you need one of the template files. All files are available in 3 different tolerances 0.1mm, 0.2mm and 0.3mm. You probably need to test all sizes for each cosmetic piece.
Print Settings Cosmetic pieces:
3 Wall loops
100% Infill
Supports on build plate only (tree)
0.2mm layer height
Print Settings New FaceUS:
3 Wall loops
15% Infill
No supports
0.2mm layer height
For modifying the files all the step files are available to download but any files uploaded have to be shared with attribution.