1 / 3
Awgem KH1 Handheld Ultrasonic Cutter Honeycomb Storage Wall (HSW) Mount/Holder (Including Fusion360 and STEP files!)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach your Awgem KH1 45W Ultrasonic Cutter to your HSW
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This model comes with an opening on its side and bottom, so you can leave the USB-C cable attached to the cutter when putting it on the wall. You can use a cable holder then to keep the other USB-C end attached to HSW.
Print the holder as standing up, in the same orientation it is in the file by default.
You will also need 2 M3 nuts, I used M3x10 screws, and 2 printed M3 nut-inserts.
I used PETG, 3 walls, 15% gyroid infill, 0.25 mm layer height.