1 / 3
Awgem KH1 Handheld Ultrasonic Cutter Honeycomb Storage Wall (HSW) Mount/Holder (Including Fusion360 and STEP files!)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach your Awgem KH1 45W Ultrasonic Cutter to your HSW
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This model comes with an opening on its side and bottom, so you can leave the USB-C cable attached to the cutter when putting it on the wall. You can use a cable holder then to keep the other USB-C end attached to HSW.
Print the holder as standing up, in the same orientation it is in the file by default.
You will also need 2 M3 nuts, I used M3x10 screws, and 2 printed M3 nut-inserts.
I used PETG, 3 walls, 15% gyroid infill, 0.25 mm layer height.