Filament Shelf Bracket for 28mm Copper Pipe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the very good model from @hein to suit 28mm copper pipe.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I remixed @hein's filament shelf brackets to suit a length of 28mm copper pipe I had left over from a rennovation project. I wanted to use 8x60 coach screws and washers for mounting the brackets directly into my wall studs, and needed the full bracket's dept to be held in between the screw head and the wall for maximum strength. I wasn't interested in screw hole covers as I like seeing the coach screw heads.
Credit due to hein for this project in the first place. I merely adapted it to suit some leftover pipe I had lying around. Since it turned out fantastic and 28mm copper pipe is readily available I thought I would share the remix back.
I printed in PETG at 0.2mm layer height. No supports are needed. Use whatever strength settings you think best. I went with 12 perimeters and 50% infill. Probably over-kill, but the brackets turned out extremely heavy / solid and that's what I wanted.
ps. The Left and Right brackets are identical, so if you're downloading STLs just download one and mirror it in your slicer. I just uploaded it pre-mirrored for convenience.