Cable channel lid for 25mm (1inch) finger duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lids for 25 mm cable ducts with finger perforations. Tried to match originals while still being printable flat.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is spare covers for 25 mm cable ducts that tend to get lost during maintenance of control cabinets. Model is 100mm, scale it to the length you need.
It's designed to have a similar profile as the original one, but with some angles modified, this way they can be printed on the flat side down, which is faster than standing on their edge.
There is still a pretty steep overhang, so some print setting tweaks might be needed, or you can print it standing on its short side, with a brim.
I have also included f3d if your duct doesn't exactly match, or if the overhang is giving print problems.