Cable channel lid for 25mm (1inch) finger duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lids for 25 mm cable ducts with finger perforations. Tried to match originals while still being printable flat.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is spare covers for 25 mm cable ducts that tend to get lost during maintenance of control cabinets. Model is 100mm, scale it to the length you need.
It's designed to have a similar profile as the original one, but with some angles modified, this way they can be printed on the flat side down, which is faster than standing on their edge.
There is still a pretty steep overhang, so some print setting tweaks might be needed, or you can print it standing on its short side, with a brim.
I have also included f3d if your duct doesn't exactly match, or if the overhang is giving print problems.