1 / 3
Heavy Duty Wall Plugs Anchors (12mm) | M8-M10 Screws — zdjęcie 1
1 / 3

Heavy Duty Wall Plugs Anchors (12mm) | M8-M10 Screws

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable 12mm wall plugs/anchors for heavy-duty M8-M10 screws. Includes 5 lengths. Print vertically with a raft!

Ocena
0 / 5
Polubienia
23
Pobrania
69
Wydruki
0
Wyświetlenia
170
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Gray

Mid-project and realized you're out of large wall plugs? Save yourself a trip to the hardware store! These heavy-duty expansion anchors are designed to hold tight in solid walls.

Designed specifically for a 12mm drill bit and M8 to M10 screws (or lag bolts).

The set includes 5 lengths:

  • 60mm

  • 80mm

  • 100mm

  • 120mm

  • 140mm

CRITICAL PRINTING INSTRUCTIONS: To ensure the plug expands correctly and doesn't snap when the screw is inserted, you must print it in the correct orientation:

  • Orientation: Print VERTICALLY (standing straight up on the bed).

  • Supports: NONE required.

  • Bed Adhesion: USE A RAFT. Because these are tall and have a small footprint, a raft is absolutely necessary to prevent them from falling over during printing. (See the included slicer screenshot for an example).

Tagi