Heavy Duty Wall Plugs Anchors (12mm) | M8-M10 Screws
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable 12mm wall plugs/anchors for heavy-duty M8-M10 screws. Includes 5 lengths. Print vertically with a raft!
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 69
- Makes
- 0
- Views
- 170
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
BOM: Printed with ROSA3D High Speed PLA Gray
Mid-project and realized you're out of large wall plugs? Save yourself a trip to the hardware store! These heavy-duty expansion anchors are designed to hold tight in solid walls.
Designed specifically for a 12mm drill bit and M8 to M10 screws (or lag bolts).
The set includes 5 lengths:
60mm
80mm
100mm
120mm
140mm
CRITICAL PRINTING INSTRUCTIONS: To ensure the plug expands correctly and doesn't snap when the screw is inserted, you must print it in the correct orientation:
Orientation: Print VERTICALLY (standing straight up on the bed).
Supports: NONE required.
Bed Adhesion: USE A RAFT. Because these are tall and have a small footprint, a raft is absolutely necessary to prevent them from falling over during printing. (See the included slicer screenshot for an example).