1 / 4
Wall Plugs Screw Anchors (6mm) | M4-M5 Screws | 5 Lengths — zdjęcie 1
1 / 4

Wall Plugs Screw Anchors (6mm) | M4-M5 Screws | 5 Lengths

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Printable 6mm wall plugs/anchors for light-duty M4-M5 screws. Includes 5 lengths (30-60mm). Print vertically with a raft

Ocena
2 / 5
Polubienia
163
Pobrania
362
Wydruki
0
Wyświetlenia
990
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Gray

Need a quick fix to hang a small picture frame, a thermostat, or a lightweight shelf? These printable expansion anchors are designed for small household tasks.

Designed specifically for a 6mm drill bit and M4 to M5 screws.

The set includes 5 lengths:

  • 30mm

  • 35mm

  • 40mm

  • 50mm

  • 60mm

CRITICAL PRINTING INSTRUCTIONS: To ensure the plug expands correctly and doesn't snap when the screw is inserted, you must print it in the correct orientation:

  • Orientation: Print VERTICALLY (standing straight up on the bed).

  • Supports: NONE required.

  • Bed Adhesion: USE A RAFT. Because these are tall and very thin, a raft is absolutely necessary to prevent them from snapping off the build plate mid-print. (See the included slicer screenshot for an example).

Tagi