1 / 4
Wall Plugs Screw Anchors (6mm) | M4-M5 Screws | 5 Lengths — image 1
1 / 4

Wall Plugs Screw Anchors (6mm) | M4-M5 Screws | 5 Lengths

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Printable 6mm wall plugs/anchors for light-duty M4-M5 screws. Includes 5 lengths (30-60mm). Print vertically with a raft

Rating
2 / 5
Likes
163
Downloads
362
Makes
0
Views
990
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

BOM: Printed with ROSA3D High Speed PLA Gray

Need a quick fix to hang a small picture frame, a thermostat, or a lightweight shelf? These printable expansion anchors are designed for small household tasks.

Designed specifically for a 6mm drill bit and M4 to M5 screws.

The set includes 5 lengths:

  • 30mm

  • 35mm

  • 40mm

  • 50mm

  • 60mm

CRITICAL PRINTING INSTRUCTIONS: To ensure the plug expands correctly and doesn't snap when the screw is inserted, you must print it in the correct orientation:

  • Orientation: Print VERTICALLY (standing straight up on the bed).

  • Supports: NONE required.

  • Bed Adhesion: USE A RAFT. Because these are tall and very thin, a raft is absolutely necessary to prevent them from snapping off the build plate mid-print. (See the included slicer screenshot for an example).

Tags