SV08 XOL Cutter Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cutter Arm for SV08 With XOL Toolhead and now Compatible with My Goose Belt Purger System SV08 mod I have uploaded
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
My Goal with this cutter was to make a very strong Cutter Arm for the SV08 with the absolute minimal amount of bed space loss and Flexing when being pushed against.
BOM
2x M3x6mm SHCS
2x M3 Roll-In T Slot Nuts
Reuse the 2 existing Gantry SHCS For Rear Arm Mount Bolts
Recommended Print Settings
Material: ABS or ASA
Orientation: Already set by file orientation
Walls/Perimeters: 5
Top/Bottom Layers: 5
Infill: 30-40% (TPMS-D or Gyroid recommended).
Scaling/Shrinkage: Print at 100% scale. Use shrinkage compensation but will work with out
Supports: Yes. SV08 Frame is annoying and a small amount of support is needed. Shown in Photo
Config
I am posting my Cutter arm X and Y coordinates I use BUT since my SV08 has physical End stop switches now and isn't Sensor less Homing from the factory anymore my X and Y limits have been changed from Stock.
So PLEASE DO NOT use them Before safely checking with small movements to its location. Breaking something on your printer isnt fun LOL
X-10 Y-359 (Normal Arm)
X-10 Y-354 (Extended Arm)