SV08 XOL Cutter Arm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutter Arm for SV08 With XOL Toolhead and now Compatible with My Goose Belt Purger System SV08 mod I have uploaded
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 10
- Makes
- 0
- Views
- 168
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
My Goal with this cutter was to make a very strong Cutter Arm for the SV08 with the absolute minimal amount of bed space loss and Flexing when being pushed against.
BOM
2x M3x6mm SHCS
2x M3 Roll-In T Slot Nuts
Reuse the 2 existing Gantry SHCS For Rear Arm Mount Bolts
Recommended Print Settings
Material: ABS or ASA
Orientation: Already set by file orientation
Walls/Perimeters: 5
Top/Bottom Layers: 5
Infill: 30-40% (TPMS-D or Gyroid recommended).
Scaling/Shrinkage: Print at 100% scale. Use shrinkage compensation but will work with out
Supports: Yes. SV08 Frame is annoying and a small amount of support is needed. Shown in Photo
Config
I am posting my Cutter arm X and Y coordinates I use BUT since my SV08 has physical End stop switches now and isn't Sensor less Homing from the factory anymore my X and Y limits have been changed from Stock.
So PLEASE DO NOT use them Before safely checking with small movements to its location. Breaking something on your printer isnt fun LOL
X-10 Y-359 (Normal Arm)
X-10 Y-354 (Extended Arm)