Food Dehydrator Insulating Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spinning adjustable airflow cover with removable airflow lid.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Works with RonCo stackable food dehydrator Model: 187-04 but I am sure it would work with some other stackable dehydrators. With the lid closed and fully stacked I was able to get to just under 78c. If you were to remove some levels and put only 1 roll of engineering filament you could most likely get over 85c. I also printed mine very fast with poor material and low infill so it could only work better with better material and more infill.
Printing
Generic PLA silk (PETG recommended)
%15 infill triangles (better insulation likely with higher %)
No supports
In the near future I plan on adding a small port for a computer fan for more airflow.