Food Dehydrator Insulating Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spinning adjustable airflow cover with removable airflow lid.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Works with RonCo stackable food dehydrator Model: 187-04 but I am sure it would work with some other stackable dehydrators. With the lid closed and fully stacked I was able to get to just under 78c. If you were to remove some levels and put only 1 roll of engineering filament you could most likely get over 85c. I also printed mine very fast with poor material and low infill so it could only work better with better material and more infill.
Printing
Generic PLA silk (PETG recommended)
%15 infill triangles (better insulation likely with higher %)
No supports
In the near future I plan on adding a small port for a computer fan for more airflow.