234 models
This model of the iconic Bronco has working suspension and wheels that spin, doesn't require any support material and comes preassembled right off the buildplate. The only thing you have to do after printing is to snip off a few tiny…
Prusa Affiliate link: http://www.prusa3d.com/#a_aid=3090 Feel free to check out my website https://www.ar3dprints.com/ All print information is included in a txt file. Hope you enjoy!
The Rockwell OV-10 Bronco was built as a light attack and observation aircraft and renowned primarily for its Close-Air Support capabilities. It is capable of carrying over 3000LB of external munitions, along with internal space for…
This is a keychain for anyone that is a fan of Ford Broncos and the new grill/logo setup.
Printable high clearance links for the Axial SCX24 micro crawler platform Works well with both stock and custom chassis I developed these high clearance links for my Axial SCX24 Basecamp, but they should also fit the C10, JLU, and Bronco.…
I made my own Bronco Sport Key Holder for the gap between the cup holders. I would print at least PETG, if not ASA or ABS. Print Settings: 15% infill .2 layer height
Snap on roof rack for Traxxas TRX-4M Bronco.
INFILL 20% SUPPORTS NO SUPPORT MASTER GADGET BY LIKING IT AND DOWNLOADING IT
This is my version of the display strand for the TRX4m. I've added a small tray between the axles for screws or small accessory pieces. It's available for the Bronco and Defender with matching text on the side.
RC Model created by the great Michael G. Hammer (DK). This is my STL-Version of this 80cm Wingspan Model. 3D-Model with gear from Sketchup-3D-Warehouse:…
Makes swapping batteries a lot simpler by keeping the body connected to the chassis. Uses the stock mounting points. Replaces the rear bumper mount and the mounting bracket connected to the roll cage on the body. 2 additional M3 holes are…
Denver Broncos light switch cover
Bronco keychain. G-code uploaded with color change point. Dimensions: Height: 4 mm Length: 6 cm Width: 1.8 cm Key chain hole diameter: 3 mm
Printed at .2 layer height with a pause for filament change. If using abs highly suggest using a brim to prevent tail and leg warping. Made for fun coffee or beer appreciated paypal.me/tipchris776
Some supports required Completely remodeled the floor based on nautcasprt6's bronco interior found on Thingiverse with added recessions for seating.
Cut in three parts to be printed seperately. It is saved in one file and you can switch between the parts by placing different parts on the printbed. Printed in petg blue, white and orange
Stylized mini vehicle based off of the new Ford Bronco. All snap fit pieces that can be printed with no supports.
Denver Broncos Keychain 3mm height
I designed this receiver hitch to be super glued onto the bottom of the SCX24 Bronco rear bumper. The drop hitch is removable for clearance when you aren't towing. The receiver profile matches the bumper as much as possible to reduce…
Ford Bronco, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings Notes: I recommend to do a color change by script at height 3.5mm and use a prime pillar Category: Keychains
INFILL 20% SUPPORTS NO SUPPORT MASTER GADGET BY LIKING IT AND DOWNLOADING IT
Spare Tire Delete Plate for TRAXXAS TRX4 2021 Bronco
Denver Broncos Retro Oversized Necklace Logo that I designed. I hope you enjoy!
Hi there! Let me introduce you to the Ford Bronco 1970 , a carefully crafted 3D model designed for those who appreciate detail and quality in their projects. Perfect for uses such as visualization, 3D printing, animation, or simply as…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Spare tire delete for the TRX4M Bronco, using original hardware. **WARNNING You have to Ruin the sticker on the spare to remove it it has a hex nut holding it onto the shell dead center so you have to poke a hole through it. put in your…
Denver Broncos Oversized Necklace Logo that I designed. I hope you enjoy!
1:10 Ladder, steps to the roof PLA, 210°C/60°C
This is a ThermoWorks Billows fan adapter to fit on the air intake pipe of an Oklahoma Joe Bronco Drum Smoker (regular or pro model). The air baffle has to be removed as this fits fairly snug over the pipe. It's angled a bit to keep light…
Hitch cover for the 2021 Bronco Sport with a 3d logo loosely based on the actual one.
Details need to be mirrored.
The bin in our Bronco can't hold quite enough, so here's a deeper design. Print upside-down (opening to build plate) without supports. Two versions, only major difference is some horizontal ribs in one version to possibly help with…
I print it no supports with pla multi color layer change
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
The Rockwell OV-10D Bronco is the 2nd generation of the airframe, which incorporated extensive modifications including a turreted infrared night-vision camera system, larger engines and props, and side-mounted chaff launchers. It is…
Printed with snug or tree supports out of PLA.
TRX4M Ford Bronco Upgrade I upgraded my TRX4M Bronco. I converted it to 2x18650 LiIon batteries. Sony/Murata 30A VTC6 3000mAh (SONY US18650VTC6 30A !) I printed out new battery holders. A hard pin was used from the 18650 battery holder. I…
Exhaust Manifold for Traxxas TRX-4 Bronco 2021. Might fit elsewhere. (4) M3*12
1:10 Roof guard PLA 210°C/60°C
A shackle mount for use with the original shackles that came with the TRX4 2021 Bronco. Simply remove the tube bumper part and mock winch, and bolt these on using M3x5mm button head screws. Interested in our RC crawler bodies and…
This is a model of the famous Ford Bronco 78. With this modelkit, you can build it in two different versions. The first
This keychain is designed to be printed with a Bambu lab printer with AMS.
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068 Custom display base are also available from $5! Contact me to discuss what you want! If you…
This is a model of a Ford Bronco from the 1970s. It fits a Auto World Xtraction style chassis. I printed this body on my elegoo mars 5 ultra resin printer. I included the fusion 360 file so you can modify it if you want to.
I wanted a high clearance bumper for my TRX-4M Bronco but still wanted it to look like a real one. I made a remix from Jraaadd's high clearance bumper, https://www.thingiverse.com/thing:5960218 and Anthem17 TRX4M Bumper with ram bar…
Made for the HB R1001/1002/1003 Beluga but will probably work on the TRX4 Bronco 2021 aswell. There are 2 different types, one with exhaust tips included and one that you can either print exhaust tips seperately or glue on bits of…
*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…
Mid counsel phone mount for 2021-2024 Full-Size Ford Bronco. Unscrew the Ford Bronco “Made In” plate and use OG screws to install the mount. I haven't tested on manual Bronco *Make sure to use ABS ASA or other high temp materials I used:…
Bits for your Bronco to help you along with your adventures! Need a hook? How about someplace to store something?
TRX4M Roof height 0.15mm PLA (Filamentum) No support
I wanted to make something cool for my father-in-law's birthday and he's a fan of the Broncos handegg team, so I put together something for his office. This took 14 hours to print with my settings, but I think it looks pretty nice. There…
A simple, rounded rectangle key fob for the Ford Bronco line. Features text and logo extruded fully through fob as negative space. The keychain in the STEP file design is fairly large, and can be sized down or up as desired (pictured is…
www.patreon.com/bkprint3d
Exhaust Manifold for Traxxas TRX-4 Bronco 2021. Might fit elsewhere. (4) M3*12
This is a remix of https://www.thingiverse.com/thing:3743471 which resizes to fit a 12oz can and adds a broncos logo. The broncos logo came from: https://www.thingiverse.com/thing:3261214 Print Settings Printer Brand: Prusa Printer: I3…
Recommend PETG or other outdoor friendly filament. Simple insert to cover trailer hitch opening. I used UV cured resin to fill in the emboss for a glossy finish in the image. Prints with or without supports, place face down on textured…
Designed for PLA or PETG 40mm x 115mm x 4.5mm
Replacement brackets to raise the front bumper of SCX24 Bronco. Out of the box, there's an ugly gap from the bumper to the body. These brackets are a direct replacement to the factory brackets. Raising the bumper reduces the gap and helps…
Place your ford bronco logo on the wall in your house or give it as a gift.
For all the Bronco lovers
A simple Denver Broncos football sign. It is 125MM x 95mm. First White, then blue then orange.
You've waited and waited and finally taken delivery of your Ford Bronco. Maybe you're a Brisbane or Denver Broncos fan. Maybe you've got a little bit of two filaments left and you want something to print. Well, here's the print for you!…
Modeled a custom spare tire cover for my Bronco, however the camera hole was too big. I couldn't find anything to fit the way I wanted, so I modeled up an insert to cover the gap of the hole and make the cover look complete. I printed in…
Sand Ladders in 1/10 scale for scale/crawler RC cars With the inscription Bronco Dimensions of the sand ladders 120mm long 40mm wide 5.5mm high
Here is a great gift or personal treat: Denver Broncos Car Rearview Mirror Ornament Hanger! Had fun designing this and planning to make all NFL teams! Feel free to add a picture if you print! The elastic string I used for this print is…
I needed an adapter to hook up my new Inkbird to my Oklahoma Joe Bronco smoker. After a little trial and a lot of error, this if the final piece. It fits nicely and holds the temperature perfectly. For my test print, I used PLA Pro just…
Whipped up this coaster in tinkercad playing around with multicolor prints on the BambuLab. Print it logo face down for a nice finish. I broke the “R” apart so you can print in 3 colors. I just open all three files at one time in BambuLab…
Print in TPU, mount using the screws on the sides of the windscreen.
tronco di legno cavo all'interno e terminale da incollare
Generally following this guide: https://www.bronco6g.com/forum/threads/how-to-magsafe-wireless-charger-install-in-factory-location-diy.32069/ , this part can be used to replace a Ford Bronco factory OEM wireless charger with an Apple…
I needed a rubber bumper for my OBS F350 hood so I copied one. I printed with Overture TPU with 3 walls and 15% cubic infill. It was a little soft so I would probably try 4 walls and 20% infill. 6 walls and 25% was too much.
Traxxas TRX-4M Defender/Bronco Felge/Rim
When I bought my TRX4m Bronco, I wanted to make it look more aggressive. I added the fender flares from a Defender body, but this wasn't enough. I have been heavily inspired by the real-world Bronco Raptors. One of the main front-end…
I made a new bumper for the traxxas bronco 2021, it can be mounted with the original screws. bars are carbon 4 and 6 mm. I hot glued it together.
Very crude enclosure I've designed for the 6th gen Broncos to fit a Hifonics BXS10D4 which has a mounting depth just shy of 3 inches and is relatively inexpensive. This was modeled using my 2022 2-door full size Bronco so I can't make any…
These are recovery boards for the TRX4m Bronco. They are 1/18 scale and very detailed. Thanks to the original creator for the board design. I've tailored them to the Bronco better by changing the logo from a Defender logo. Otherwise, they…
Good luck to everyone and good printing
ford bronco badge and keychain
Adapter to mount a beauty disk with Bowens mount to a Broncolor Studio Flash (Siros). Printed with PETG, 0,2 mm stuctural. Printing time about 3,5 hours. Unfortunately, the adapter slowly distorted (melted). I strongly recommend using a…
thanks to dweeks for the nice model! I only added text and divided the parts, all Kudos to you! may be scaled up by to 130% to fir 220*220 bed. make sure to print face down for a nice and smooth optic. print eye only if wanted - resize to…
This is a jerrycan holder I made for the TRX4m Bronco. It can hold either the stock jerrycans from the Defender or my design, which can be found here: https://www.thingiverse.com/thing:6871004 It utilizes the stock hardware, and fits…
files from Thomas Larson downloaded from grabcad
A piece of desk art for the Bronco enthusiast. It is about 7.5 inches (200mm) wide. Scale the X and Y in your slicer if you want a different size. If you don't have multi filament, pause after layer 10 at .2 layer height for filament…
The clasp is ideally printed in TPU and can be glued into the door. PLA/PETG/ABS should also work after sanding it for the correct fit. Flip in your slicer software to get both sides. Prints without supports.
This is inspired some cupholder inserts I saw online. I didn't like their design, and I didn't to copy them, so I came up with my own design. It measures 2.75 inches in diameter and should fit the cupholder of the Ford Bronco. I designed…
These are replacement left and right trim pieces for the driver side dashboard of some 90's OBS Ford Trucks. I modeled these using the OEM dash panel out of my Bronco so I can't vouch for fitment in aftermarket panels, however I'd imagine…
I made an intenal servo winch mount for the HB Beluga R1001/1002/1003 Bronco 2021 that will replace the front battery tray. Will fit without any modifications to the body but you will need to make some holes in bumper and bumper mount.…
This is a remix of the TRX4M Bronco Interior Floor by Xyph3D. The cutouts for the seats have been removed and the size of the cutout at the rear has been increased to allow a little more room for the wires.
A replacement throttle cable cover for the 1987-97 Ford F-series and Bronco. It should fit 5.0l and 5.8l engines. Print it in at least ABS.
Flexible broncos logo fidget Category: 3D Printing
Broncolor speedring mount to build your own light.
***Orange and black is OEM, Red is printed from the model*** Was asked to create higher visibility vent tabs as the one near the door was hard to see. Must remove the existing vent tabs to put these on. BDUSA has a youtube video showing…
This mount was designed to fit this MagSafe wall mount. It attaches to the accessory mount on the dash of the 2021 Ford Bronco using this camera knob .
