PTFE Adapter for Universal Auto-Rewind Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits the front side of the stand
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
If you're like me and accidentally mounted your spool rewinder stands backwards, I figured it would be easier to just design myself out of the problem really quick rather than completely re-layout the whole top of my LACK table. I was going to use another PTFE guide that fits on the other side but then realized after everything was screwed down that I had it all backwards.
I also included a modified front clamp that allows the PC4 fittings to clear. This is useful if you're using these hold-down clamps for the stands: https://www.printables.com/model/5617-brackets-for-securing-auto-rewinding-spool-holder
This is my first time remixing anything or making a part that fits into an existing model, so it's not perfect, but it most certainly gets the job done. They're pretty much a nice press fit but I did dab a little CA glue on each side before inserting just to make sure they stay put.