Gridfinity organizers for hf adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These hold adapters for N-Type,SMA,BNC and PL-259
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I have standardised on n-type connectors for outdoor use and bnc for indoor, I then made these gridfinity trays to hold all the combinations from the other common plug types.... I might have gone a bit overboard with the adapters and combinations, but at least now I have all possible combinations.
The box and base gridfinity platform are not my design they are from here: https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0
I've only done the work of putting all the right holes for each connector, etc.
Each tray is 2x4 except the BNC tray which is 2x2, These trays are designed in a way that my fat fingers can confortably pick up each connector easily, since the bnc's are thinner I can make it smaller. SMA's could also fit in a much smaller footprint, but since I have some many adapters I though I would just put a lot on a tray.
Printed mine in PETG 0.2mm slices on a MK2.5S no supports needed on my printer.
Anyway hope somebody else finds it useful.