Airsoft Monster suppressor/silencer (Functional)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Suppressor that a white monster can slides over. Has gyroid infill and makes airsoft toys quieter. 14mm ccw thread.
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 359
- Wydruki
- 1
- Wyświetlenia
- 2470
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is only guaranteed to work with 16oz white monster energy cans due to some flavors being different sizes. You're welcome to try others but don't say I didn't warn you.
Make one cut around the can (I've found that the best/easiest place to do this cut is near the bottom of the can so you can make the hole easier), another to cut the lid section out (for the nut and smaller section of cylinder to fit through), and poke a ~9mm hole in the center of the bottom.
around the can cut  | hole  | lid section cut  |
|---|
(The skinny cylinders in the image are the 2 modifiers to let it have exposed infill. It won't print like that.)
Use super glue all over or hot glue in the little side divot to help secure the can to the print. I prefer using super glue for the tiny bit of can and hot glue for the big piece.
I made this to be a heavier duty, longer lasting, monster can suppressor that actually functions instead of being solely aesthetic.
I made the inner walls stop existing so air would dissipate in the gyroid infill.
Print the file as is in whatever material you like. No further supports or modification needed, but feel free to edit and leave ideas.