Cable Clips for 1515 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cable Clips for 15cm x 15cm extrusions - used for example in Voron 0.1
- Ocena
- 5 / 5
- Polubienia
- 154
- Pobrania
- 772
- Wydruki
- 4
- Wyświetlenia
- 2737
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
A is opened in lower area and 7,6mm tall (above exstrusion)
B is opened on one side and 9.6mm tall
C i fully opened, needs a cover on top, and 11.8mm tall (with a clip)
A2, B2, C2 are with cutted 'teeth' that holds clip on extrusion
Needs less force to put in and it's easier to take off but needs little better cooling (model is with 45dgr angle parts)
C3 is with additional hole on side
---
Models made in Blender 3d
Printed on JG Maker A1
Tested on Voron 0.1 from Blurolls
---
Made for 0.4mm nozzle
Using of Pet-G recommended but I printed it with PLA
Printed with 0.2mm layer hight with brim for 1st layer