Rich Solar Panel Corners
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corner and Joining Corner bumpers for Rich Solar Panels
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
After I scraped up the bagger on my mower driving by the panels, I looked for a model to print corner protectors for the aluminum solar panel frames, but the ones I found did not fit the Rich Solar panel frames. Then, I decided to make a kind of T piece to join panels together to keep them aligned in a row, These are what I came up with. They snap on securely and stay in place well. I printed these in PETG to endure heat from the sun against the black solar panels, and printed without any supports on a BambuLab P2S.
If you use panels from Rich Solar, these should work well for protecting the corners as well as aligning the panels in a row (or column).