5/8 Billboard Gripper Bar Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits on the end of a 5/8 gripper rod and can be secured with a 1/4 20 thumb screw.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Attachment for a 10' 5/8 diameter billboard side rod (gripper bar) used to kind of cradle the 5/8 diameter of the top 22' gripper rod to easily set in the top hangers with one simple removable tool that could be carried in a pocket eliminating the need to have to use a paint pole (in most applications).
Fits on the end of a 5/8 gripper rod and can be secured with a 1/4 20 thumb screw.
This model is designed to be used with a 1/4 20 spade end thumb screw that can be be purchased at reasonable cost.
There are two variants which is just a simple side placement of where the thumb screw will go which is completely user preference.
Should be printed in a tough material.