5/8 Billboard Gripper Bar Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits on the end of a 5/8 gripper rod and can be secured with a 1/4 20 thumb screw.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 1
- Views
- 29
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Attachment for a 10' 5/8 diameter billboard side rod (gripper bar) used to kind of cradle the 5/8 diameter of the top 22' gripper rod to easily set in the top hangers with one simple removable tool that could be carried in a pocket eliminating the need to have to use a paint pole (in most applications).
Fits on the end of a 5/8 gripper rod and can be secured with a 1/4 20 thumb screw.
This model is designed to be used with a 1/4 20 spade end thumb screw that can be be purchased at reasonable cost.
There are two variants which is just a simple side placement of where the thumb screw will go which is completely user preference.
Should be printed in a tough material.