Footrest / Stand - 310x250mm (Printed on Small Printers)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb design footrest or laptop stand. Printed in multiple parts on every printer.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Originally designed as a footrest but came out pretty great for an angled stand as well.
I have uploaded the step files as well for anyone interested in designing bigger version or attachments.
There are 2 versions included, one with full parts for large bed sizes and one with multiple parts for smaller printers.
Dimensions:
310x250mm
12 degree angle
90mm Height Front
140mm Height Back
Hardware:
One Part Design:
(12x) M3x5x4 Heat Inserts AB012
(12x) M3x20 Screws
Multi Part Design:
(44x) M3x5x4 Heat Inserts AB012
(44x) M3x12 Screws
(12x) M3x20 Screws
Multi Part Design for small beds like A1 Mini (180x180mm):
The Legs can be printed on an angle to fit the bed.
The Top is designed by 4 identical small parts that can be assembled together.
You can screws multiple of them together using Heat Inserts and Screws on the sides of the Legs.
Heat Inserts:
Heat Inserts (AB012) must be added to the dedicated spots on the outer perimeter of the part when it is facing up, as shown in the picture.
Assembly Video:
